网线的正确使用与维护方法，延长使用寿命 一、正确使用网线 1. 选择合适的网线：根据使用环境和需求选择合适的网线类型，如超五类、六类或七类网线。

2. 正确连接：在连接网线时，应确保连接器与网线、设备接口等均正确连接，避免出现松动或接触不良的情况。

3. 避免过度弯曲：在布线过程中，应尽量避免过度弯曲网线，以免影响信号传输质量。 4. 避免过度拉扯：在使用过程中，应避免过度拉扯网线，以免造成物理损伤。 二、网线的维护方法 1. 定期检查：定期对网线进行检查，如发现破损、断裂等问题应及时更换。 2. 保持清洁：定期清洁网线表面，避免灰尘、油污等对网线造成损害。 3. 防止潮湿：网线应存放在干燥的环境中，避免潮湿导致绝缘性能下降。 4. 避免高温：避免将网线暴露在高温环境中，以免影响其使用寿命。 三、延长网线使用寿命的注意事项 1. 合理布线：在布线过程中，应合理规划线路走向，避免频繁弯曲或拉扯。 2. 正确存储：不使用的网线应存放在干燥、通风的地方，避免长时间受压或扭曲。 3. 避免频繁插拔：频繁插拔网线可能导致接口松动或损坏，应尽量避免。 4. 使用保护套：在需要保护的地方使用保护套，如穿过墙角、过门等地方。 四、英文翻译 Correct Use and Maintenance of Network Cables to Prolong Their Service Life I. Correct Use of Network Cables 1. Select the appropriate network cable: Choose the right type of network cable based on the usage environment and needs, such as Category 5e, Category 6, or Category 7 cables. 2. Correct Connection: Ensure that the connectors, network cables, and device interfaces are properly connected to avoid loose or poor contact issues. 3. Avoid Excessive Bending: During the wiring process, try to avoid excessive bending of the network cable to ensure signal transmission quality. 4. Avoid Excessive Pulling: During usage, avoid pulling on the network cable excessively to prevent physical damage. II. Maintenance Methods for Network Cables 1. Regular Check-up: Regularly inspect the network cables and replace any damaged or broken ones promptly. 2. Keep Clean: Clean the surface of the network cable regularly to prevent dust, oil stains, and other damage to the cable.

3. Prevent Humidity: Store network cables in a dry environment to avoid a decrease in insulation performance due to humidity.

4. Avoid High Temperature: Avoid exposing network cables to high-temperature environments to ensure their service life is prolonged.

III. Precautions for Prolonging the Service Life of Network Cables 1. Proper Routing: During the wiring process, plan the routing direction reasonably to avoid frequent bending or pulling of the cables. 2. Correct Storage: Store unused network cables in a dry and ventilated place to avoid being pressed or twisted for a long time. 3. Avoid Frequent Plugging: Frequently plugging in and out of network cables may cause interface looseness or damage, so try to avoid it as much as possible. 4. Use Protective Covers: Use protective covers in areas that require protection, such as when passing through corners or doors.